Template:ETH-USB-HUB-HAT-manual

From ingcool
Revision as of 19:20, 19 April 2020 by INKU-admin123 (talk | contribs) (创建页面，内容为“===使用步骤=== *将ETH/USB HUB HAT插入到Raspberry Pi Zero/ Zero W的40PIN引脚上。 *将USB转接头连接模块的micro USB接口和树莓派的OTG接口…”)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

使用步骤

  • 将ETH/USB HUB HAT插入到Raspberry Pi Zero/ Zero W的40PIN引脚上。
  • 将USB转接头连接模块的micro USB接口和树莓派的OTG接口。
  • 给树莓派上电，PWR指示灯会亮起
  • 将网线接入模块的RJ45接口，ACT灯闪烁
  • 将USB设备连接模块上的USB1~USB3接口，对应的指示灯D1~D3会亮起

接口说明

  • USB: Micro USB接口可以接入到树莓派的USB （OTG）接口
  • USB1 ~ USB3：USB扩展端口，可以接USB设备
  • ETH：RJ45网卡接口，可以接入有限网络
Retrieved from "http://www.ingcool.com/w/index.php?title=Template:ETH-USB-HUB-HAT-manual&oldid=74"