ETH/USB HUB HAT

Introduction

Ethernet / USB HUB HAT for Raspberry Pi, 1x RJ45 Ethernet Port, 3x USB Ports

Features

• 3x USB ports, compatible with USB2.0/1.1
• 1x RJ45 10/100M port, based on the RTL8152B Ethernet chip
• Onboard multi indicators, for monitoring the status of power, Ethernet, and each USB port
• Operating voltage：5V

User guide

How to use it

• Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
• Connect Network cable to RJ45 interface of ETH/USB HUB HAT
• Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
• When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on

Interfaces

• USB: USB interface, should be connected to USB port of Raspberry Pi
• USB1 ~ USB3：Extended USB ports, can be connected to external USB devices
• ETH：RJ45 port, can be connect to wired network

Resources

• Schematic