Template:ETH-USB-HUB-HAT-manual

From ingcool
Revision as of 16:34, 8 June 2020 by INKU-admin123 (talk | contribs) (→‎=Interfaces)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

How to use it

  • Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
  • Connect Network cable to RJ45 interface of ETH/USB HUB HAT
  • Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
  • When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on

Interfaces

  • USB: USB interface, should be connected to USB port of Raspberry Pi
  • USB1 ~ USB3：Extended USB ports, can be connected to external USB devices
  • ETH：RJ45 port, can be connect to wired network
Retrieved from "http://www.ingcool.com/w/index.php?title=Template:ETH-USB-HUB-HAT-manual&oldid=321"