Template:ETH-USB-HUB-HAT-manual
Revision as of 16:34, 8 June 2020 by INKU-admin123 (talk | contribs)
How to use it
- Insert the ETH/USB HUB HAT to Raspberry Pi. Connect USB interface of Raspberry Pi to micro USB interface of ETH/USB HUB HAT
- Connect Network cable to RJ45 interface of ETH/USB HUB HAT
- Power on Raspberry Pi. PWR indicator lights on and ACT indicator is flashing. Now you can check the network and USB ports
- When USB devices are connected to USB1~USB3 ports, related LED D1-D3 light on
=Interfaces
- USB: USB interface, should be connected to USB port of Raspberry Pi
- USB1 ~ USB3：Extended USB ports, can be connected to external USB devices
- ETH：RJ45 port, can be connect to wired network
