Template:E-Paper FAQ
Revision as of 15:44, 8 June 2020 by INKU-admin123 (talk | contribs)
1、Working requirements of e-Paper?|
- 【Working】Temperature: 0~50°C; Humidity: 35%~65%RH
- 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 6 months
- 【Transport】Temperature: -25~70°C; Max transport time: 10 days
- 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h
2、 What do you need to note about e-Paper refreshing
- Refresh mode
- Full refresh: e-Paper flicker when full refreshing to remove ghost image for best display.
- Partial refresh: It doesn't flicker if you use partial refresh (only some of the two-color e-paper support partial refresh). Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage
- Refresh rate
- When using, you should set the update interval at least 180s. (except Partial supportable types)
- Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for a long time.
- You need to update the content of three-color e-Paper at least one time every 24h to avoid the burn-in problem.
- Working place
- We recommend you to use the e-Paper indoor. If you need to set the e-paper outdoor, Please place the e-paper in shadow and protect it from UV. When you designed you e-paper product, you should take care about the working situation like temperature, humidity, etc.
3、Why the e-Paper display a black frame？
- You can configure Border Waveform Control register or VCOM AND DATA INTERVAL SETTING register to change the frame.
4、Could the e-Paper work again after sleeping？
- You can use the initial function to wake it up and then update.
