Difference between revisions of "Template:E-Paper FAQ"
(创建页面，内容为“1、电子墨水屏的使用环境？| *【工作条件】温度范围：0~50°C ；湿度范围：35%~65%RH *【存储条件】：温度范围：30°C以下； 湿…”) |
|||
| Line 1: | Line 1: | ||
| − | + | 1、Working requirements of e-Paper?| | |
| − | * | + | *【Working】Temperature: 0~50°C; Humidity: 35%~65%RH |
| − | * | + | *【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 6 months |
| − | * | + | *【Transport】Temperature: -25~70°C; Max transport time: 10 days |
| − | * | + | *【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h |
| − | 2、 | + | 2、 What do you need to note about e-Paper refreshing |
| − | * | + | *Refresh mode |
| − | ** | + | **Full refresh: e-Paper flicker when full refreshing to remove ghost image for best display. |
| − | ** | + | **Partial refresh: It doesn't flicker if you use partial refresh (only some of the two-color e-paper support partial refresh). Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage |
| − | * | + | *Refresh rate |
| − | ** | + | **When using, you should set the update interval at least 180s. (except Partial supportable types) |
| − | ** | + | **Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for a long time. |
| − | ** | + | **You need to update the content of three-color e-Paper at least one time every 24h to avoid the burn-in problem. |
| − | * | + | *Working place |
| − | ** | + | **We recommend you to use the e-Paper indoor. If you need to set the e-paper outdoor, Please place the e-paper in shadow and protect it from UV. When you designed you e-paper product, you should take care about the working situation like temperature, humidity, etc. |
| − | + | 3、Why the e-Paper display a black frame？ | |
| − | * | + | *You can configure Border Waveform Control register or VCOM AND DATA INTERVAL SETTING register to change the frame. |
| − | + | 4、Could the e-Paper work again after sleeping？ | |
| − | * | + | *You can use the initial function to wake it up and then update. |
Latest revision as of 15:44, 8 June 2020
1、Working requirements of e-Paper?|
- 【Working】Temperature: 0~50°C; Humidity: 35%~65%RH
- 【Storage】Temperature: ≤30°C; Humidity: ≤55%RH; Max storage time: 6 months
- 【Transport】Temperature: -25~70°C; Max transport time: 10 days
- 【Unpack】Temperature: 20°C±5°C; Humidity: 50%RH±5%RH; Max storage time: Should be assembled in 72h
2、 What do you need to note about e-Paper refreshing
- Refresh mode
- Full refresh: e-Paper flicker when full refreshing to remove ghost image for best display.
- Partial refresh: It doesn't flicker if you use partial refresh (only some of the two-color e-paper support partial refresh). Note that you cannot use Partial refresh all the time, you should full refresh e-paper regularly, otherwise, ghost problem will get worse even damage
- Refresh rate
- When using, you should set the update interval at least 180s. (except Partial supportable types)
- Please set the e-Paper to sleep mode or power off it directly, otherwise, the e-Paper is damaged because of working in high voltage for a long time.
- You need to update the content of three-color e-Paper at least one time every 24h to avoid the burn-in problem.
- Working place
- We recommend you to use the e-Paper indoor. If you need to set the e-paper outdoor, Please place the e-paper in shadow and protect it from UV. When you designed you e-paper product, you should take care about the working situation like temperature, humidity, etc.
3、Why the e-Paper display a black frame？
- You can configure Border Waveform Control register or VCOM AND DATA INTERVAL SETTING register to change the frame.
4、Could the e-Paper work again after sleeping？
- You can use the initial function to wake it up and then update.
